Electromagnetic Flow Meter Supporting Diameter DN25-2600mm for Industrial Liquid Monitoring
製品詳細
起源の場所: 中国
ブランド名: COWELL
証明: MFG Certificate
モデル番号: LDシリーズ
支払及び船積みの言葉
最小注文数量: 1
パッケージの詳細: ハードカートンまたは木製ケース
受渡し時間: 5-15営業日
支払条件: T/T
直径: |
DN25-2600mm |
電極材料: |
316L(ステンレス)、HC、HB、Ti、Ta |
構造タイプ: |
コンパクトまたはセパレート |
電源: |
24VDCか220VAC |
直径: |
DN25-2600mm |
電極材料: |
316L(ステンレス)、HC、HB、Ti、Ta |
構造タイプ: |
コンパクトまたはセパレート |
電源: |
24VDCか220VAC |
Description
LD Series electromagnetic meter is a kind of electromagnetic induction type flow meter, which consists of sensor and intelligent signal conversion. it can measure the volume flow rate of all kinds of conducting liquids including acid, alkali, salt and strong corrosive liquids and pulp, mud, oars, sewage water and liquid with solid. It is mainly applicable to petrochemical, steel, electricity, metallurgy, textiles, food, paper and pharmaceutical industries and the environmental protection and water conservancy projects and other fields.
Technical Specification
Suitable tube caliber: DN25~DN2600(below DN25 unstandard)
Electrode material: 316L(stainless steel), HC, HB, Ti, Ta
Suitable Medium: Liquid with conductive ratio more than 5 μs/cm
Measuring range: 0.1~10m/s (extendable to 15m/s)
Upper limit of span: 0.5~10m/s. 1~5m/s recommended
Accuracy class: 0.3, 0.5, 1.0
Output signal: 4~20mADC, load≤ 750Ω, 0~3kHz, 5V with source and changeable width. High terminal and effective frequency output, RS485 interface
Operation pressure: 1.0MPa, 1.6MPa, 4.0MPa, 16MPa (special)
Fluid temperature: 20C~80C, 80C~130C, 130C~180C according to liner material
Environmental temperature: sensor40~80º C. Transducer 15~50º C
Environmental humidity: ≤85%RH (at 20º C)
Cable outlet size: M20x1.5
Power supply: 220VAC± 10%, 50Hz± 1Hz, 24VDC± 10%
Power consumption: ≤8W
Protection ratings Combined type: IP65. Separate type: Sensor IP68, transducer IP65
Materials of liner: PTFE, soft rubber etc
Connection of flange: GB911988(DIN2051, BS4504)
Earthing material: 1Cr18Ni9Ti (stainless steel), HC, Ti, Ta, Cu
Flow Range
|
Diameter (mm) |
Flow Rate Measurement (m3/h) |
Diameter (mm) |
Flow Rate Measurement (m3/h) |
|
φ15 |
0.06~6.36 |
φ450 |
57.23～5722.65 |
|
φ20 |
0.11～11.3 |
φ500 |
70.65～7065.00 |
|
φ25 |
0.18～17.66 |
φ600 |
101.74～10173.6 |
|
φ40 |
0.45～45.22 |
φ700 |
138.47～13847.4 |
|
φ50 |
0.71～70.65 |
φ800 |
180.86～18086.4 |
|
φ65 |
1.19～119.4 |
φ900 |
228.91～22890.6 |
|
φ80 |
1.81～180.86 |
φ1000 |
406.94～40694.4 |
|
φ100 |
2.83～282.60 |
φ1200 |
553.90～55389.6 |
|
φ150 |
6.36～635.85 |
φ1600 |
723.46～72345.6 |
|
φ200 |
11.3～1130.4 |
φ1800 |
915.62～91562.4 |
|
φ250 |
17.66～1176.25. |
φ2000 |
1130.4～113040.00 |
|
φ300 |
25.43～2543.40 |
φ2200 |
1367.78～136778.4 |
|
φ350 |
34.62～3461.85 |
φ2400 |
1627.78～162777.6 |
|
φ400 |
45.22～4521.6 |
φ2600 |
1910.38～191037.6 |
